186-6108-0091
The whole process of the hot melt machine is to use high temperature to melt the solid heat into a liquid, and transfer the liquid heat to the hot melt gun according to the hot melt tube to spray paint on the pasted raw materials. However, the temperature must be set on the display earlier in the process of melting and melting. So, how should the temperature be set for the melting machine?
In fact, the setting of this temperature is related to the melting point temperature of the hot melt. When purchasing hot melt, you must know the dealer clearly. The temperature of the hot melt machine can be set a little higher than the melting point, about 5-10 degrees higher is better. It is enough to ensure that the hot melt is completely melted, not too much higher, bearing in mind the principle of "too much is not enough".
The more remarkable situation of the hot melt machine is that everything is performed as required. After the hot melt is completed, you can see that the pillars are small and the components are relatively loose, and they can even be separated among them. If you look at the thermostat of the fuser at this time, you can see from the top of the thermostat display of the fuser that the specific temperature does not match the set temperature. The solution is: first check whether the thermal resistance power switch is turned on, otherwise, turn on the thermal resistance power switch first. The next thing to do is to wait for the specific temperature to reach the set temperature before it can be made into a hot melt.
When the specific temperature reaches the set temperature, a prompt will appear in the hot melting point machine, so there is no need to worry about the problem of "what should I do if the temperature is not reached?". The hot melt machine is generally a touch screen type, which is convenient and simple to set up. You only need to type in the temperature value on the page. If you have any other doubts about the temperature setting, you can consult anytime and anywhere.
Contact: Manager Zhang
Tel: 18661080091
Contact: Manager Wang
Tel: 15052254070
Contact: Manager She
Tel:18651028660
Telephone: 0510-85855767 / 0510-83760992
Email: mxter168@163.com
Address: Building 1, No. 6, Chunhui Road, Huishan Economic Development Zone, Wuxi City
(Scan on WeChat)